Toggler SnapSkru 30010 Self-Drilling Drywall Anchor with 1/2 inch Screws, Box of 100

TOGGLER® SnapSkru® Self-Drilling Anchor, Regular w/ Screws (Box of 100) Everyone loves self-drilling drywall anchors – you don't need a drill to install them and they go in quickly and easily. TOGGLER’s SnapSkru® anchors are the only ones, however, that lock symmetrically on the wall and ceiling for truly secure fastening! Every time you tug on a toilet tissue holder or a towel bar or a window blind, the other self-drilling anchors come out as quickly as they went in, because nothing prevents their sharp threads from cutting back through the drywall as the anchor is rocked in the wall.

How it Works
When activated with a screw, the SnapSkru anchor opens with an audible "pop", locking the anchor on the wall. The drywall gypsum and its paper are kept in compression and thereby immediately reinforced, providing much greater holding power than the other self-drilling anchors that are just a small screw in a large screw. And, the SnapSkru anchor's built-in positive stop resists over-drilling!

Applications
TOGGLER’s SnapSkru anchors can be used with almost any material, including: drywall, gypsum board, plasterboard and wallboard. It’s perfect for projects that include mounting shelves, bathroom accessories, draperies, mirrors, etc. This particular anchor includes combo-head screws.

Installation Instructions
1. Press tip of SnapSkru anchor into drywall using #2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Use screw with minimum thread length = thickness of item + 1-1/4" (32mm). Maximum item thickness with 1-1/2" long screw: 3/4". For thicker items, use a longer screw.