Toggler Snaptoggle 21050 Stainless Steel Heavy-Duty Anchor 2" to 9-1/2" Grip Range - 50 Pack

This revolutionary anchor can turn a two-person job into a one-man install. The TOGGLER SNAPTOGGLE® is superior to conventional toggle bolts, such as wing toggles or gravity toggles, in more ways than one. The strong plastic straps work in the thickest base materials and will not break prematurely like other plastic straps. The straps snap off flush with the wall every time, assuring precise alignment. In addition, the metal channel pushes aside insulation. This anchor puts the strongest toggle bolt in the smallest hole, and allows for removal of bolt or fixture without the anchor falling behind wall. This anchor is strong; it won’t damage or break through the wall even when vibrated!

Applications
TOGGLER’s SNAPTOGGLE anchors can be used with almost any material, including: hollow masonry, and wallboard/drywall. It's easy to use – you pre-install it without a bolt. It's accurate – the rugged pre-installation mechanism centers the metal channel in a small hole, before bolt insertion. and the bolt won't sag. It's quick – it can be used with a screw gun, and the anchor won't spin in the hole. Use a 1/4" x 20 bolt (our SKY5058) with this anchor.

Installation Instructions
1. Drill appropriate sized hole. Hold the metal channel flat alongside plastic straps and slide the channel through the hole.
2. Hold the ends of the straps together between thumb and forefinger and pull toward you until channel rests behind the wall. Ratchet cap along straps with your other hand until flange of cap is flush with wall.
3. Place your thumb between the straps at the wall. Push your thumb side to side, snapping off the straps level with the flange of the cap.
4. Place item over flange. Insert bolt and tighten until snug against item, then stop. Use a machine screw or bolt to thread in the metal channel.