1
/
of
1
Toggler
Toggler 1422 Mushroom Head Nail-It Drive Nail Anchors 2.5 x 1.5 inch- 100 Pack
Toggler 1422 Mushroom Head Nail-It Drive Nail Anchors 2.5 x 1.5 inch- 100 Pack
Regular price
$101.85 CAD
Regular price
Sale price
$101.85 CAD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
The Nail-It Drive Nail Anchor is a 2-piece nail-in anchor comprised of a corrosion resistant zamac anchor body and a steel or stainless steel drive nail/pin. The Nail-It anchor is easy to install and ideal for light-duty and tamper-proof applications in concrete, block, brick or stone.
Specifications:
 Diameters: 3/16"  1/4"
 Materials:
- Anchor Body: Die Cast Zamac Alloy
- Pin/Nail: Cold Rolled Steel with Zinc
- Plating ASTM B633 or 304 Stainless Steel
 Head Style: Mushroom
 Finish: Zinc Plating ASTM B633
 Federal Specifications: GSA FFS-325, Group V, Type 2, Class 2
Applications
 Roof Flashing
 Masonry Anchorage and Brick Ties
 Electrical Fixtures
 Mechanical Attachments
 Furring Strips
 Brackets
Installation
1. Drill the hole perpendicular to the work surface at least 1/4Â deeper than the calculated embedment depth. Clean the hole using compressed air and a nylon brush.
2. Insert anchor assembly through mounting holes in fixture and into anchor hole.
3. Tap gently until head of anchor body is set tightly against item to be fastened. Gently hammer pin flush to expand body. Do not overdrive nail into body as this could damage the anchor.
Specifications:
 Diameters: 3/16"  1/4"
 Materials:
- Anchor Body: Die Cast Zamac Alloy
- Pin/Nail: Cold Rolled Steel with Zinc
- Plating ASTM B633 or 304 Stainless Steel
 Head Style: Mushroom
 Finish: Zinc Plating ASTM B633
 Federal Specifications: GSA FFS-325, Group V, Type 2, Class 2
Applications
 Roof Flashing
 Masonry Anchorage and Brick Ties
 Electrical Fixtures
 Mechanical Attachments
 Furring Strips
 Brackets
Installation
1. Drill the hole perpendicular to the work surface at least 1/4Â deeper than the calculated embedment depth. Clean the hole using compressed air and a nylon brush.
2. Insert anchor assembly through mounting holes in fixture and into anchor hole.
3. Tap gently until head of anchor body is set tightly against item to be fastened. Gently hammer pin flush to expand body. Do not overdrive nail into body as this could damage the anchor.
Share
